Welcome to the TeslaFi support community.
Please enter your question, feature request, or issue below. Specific questions related to issues with your account can be sent privately by selecting "Or leave us a private message" below.
No charge savings at superchargers
Charge savings are 0€ for superchargers, but x€ at other stations - with cost set to 0 for both.
Battery usage percentage sometimes is wrong
Today my last two drives are logged as:
1%, 0.93 kWh
2%, 0.92 kWh
I think it doesn't make sense that the first percentage is lower while the kWh are slightly higher.
The battery percentage is rounded to a whole number somehow and has an accuracy of .9%. The kWh is calculated through rated miles used which has an accuracy of .1 miles and a scale of 200-300 miles. Plus the kWh used is rounded.
For example:
89.9% - 91.1% could be reported by the API as 89% - 91%. 1.2% really used - 2% reported by the api.
89.6% - 90.9% could be reported by the API as 89% - 90%. 1.3% really used - 1% reported by the api.
Average Amperage on Home Charging is 0
Multiple of my charge entries at home look like this:
Avg Amps - 0A
Max Amps - 30A
My UMC provides 40A changing and I have it lowered to 30. The raw charging data shows I got 30 except for a ramp up, so why is average 0?
Post - 8.1 update, what's the plan?
I just saw the notification that the 8.1 firmware update messes up logging in TeslaFi. What specific areas are affected, and what's your thinking on how and when you can fix them? Is Battery Current the primary way you determine energy consumption? What alternatives are there?
Most of all, how can we in the TeslaFi community help? This is an invaluable app and we don't want to see it damaged
Logging does not restart after password reset
I changed my password. Logging stopped. I created a new token and enabled logging. But it does not start again. No new log entries.
Charge count mismatch
On the page "Charging summary" I see in the section "Charge Count At Location" that I have 11 "# Of Charges" at Address "Supercharger Lauenau".
Below in the section "Supercharger Count" I see that I have 12 "# Of Supercharges" at Supercharger Lauenau.
For the other Superchargers the counts match for both sections.
Map doesn't load with many/long drives
For some days the map overview on the right side below the pie chart does not load.
Example: Sunday 26-03-2017
It seems to always occur on days with many/long drives.
support s100d
Can you please enable support for a model S100D. I selected S90D for now.
Thank you!
Customer support service by UserEcho
