Welcome to the TeslaFi support community.
Please enter your question, feature request, or issue below. Specific questions related to issues with your account can be sent privately by selecting "Or leave us a private message" below.
There is a temporary issue contacting the Tesla servers - Error 6
Every time I want to get a token I just get this
I already did reset my tesla account password, but the error persists. Is this a bug with Teslafi or are Teslas server really not responding?
Offline - Idle Timer Reset
Car is showing as offline - when checking the Raw Data Feed, I get the following error:
Offline - Idle Timer Reset |
Can't see anything in support to explain what this means.
Request to receive emails in text format instead of HTML
I receive SMS messages in HTML format which turns out to be junk. Is there anyway to receive my SMS in text format and not in HTML format?
Does TeslaFi have access to real time (or recent) costs per kWh for each supercharger station?
When planning a road trip and there are 5 superchargers I could choose to use en route, I'd rather charge at the $0.23/kWh stations than the $0.35/kWh stations, but for the life of me I can't find any sort of pricing to know in advance how much each station is charging per kWh. Do you have access to that sort of data? Would you be able to show "average kWh cost" for each supercharger station, or some sort of data that would let me see how much I could expect to pay if I were to charge at station A instead of station B or C?
Thank you.
show drive search summary only
I don't see any way (or any place) where I can get the equivalent of the drive search and download without the detail. I'd like to see just the summary that is in the red boxes on the right. For example, I want to see that information over the past 12 months, I have to wait (assuming it eventually get done I haven't been patient enough so far) forever for it to finish writing every drive to the screen. Perhaps a checkbox for summary only where the check for download only is.
Battery Report showing pretty dramatic improvement in my Model 3's battery that has 46,519 miles on it
I found it interesting to see a pretty dramatic improvement in my battery's projected range over the past 8,000 miles.
Given it's not a sudden, but instead a very gradual improvement, it doesn't seem to be merely an artifact of a firmware update.
Anybody else seeing such a change?
Battery Report Beta and Battery Degradation Report are now merged into one
I've noticed that there's no longer separate "Battery Report Beta" and "Battery Degradation Report" reports, it's just "Battery Degradation Report". I guess it's mature enough to just have one type now, so in general, such simplification is good.
Add 'remaining KWh' field/summary at the top for completed charge based on charge limit.
Hi,
Would it be possible to add a 'remaining kwh' field at the top which calculated the amount of kwh required until the charge limit has been reached? It shows remaining time so kwh should be possible too I suppose. This would be quite handy to have to see if I can 'charge it fully' with the kwh I have made that day with solar panels.
Improve display and calculation of Sentry Mode drain
I rely heavily on TeslaFi to figure out best strategies for trips (when and where to park, for how long, sentry mode on or off, etc). One of my favorite parts of the site is the summary on the right (or bottom on mobile) for each day's view. This has a good breakdown of miles and battery losses due to idling/parking, cooling fans, vampire drain, and sentry. However, Sentry Mode loss is not really calculated or displayed in a meaningful way. There are three loss tables - Sleep, Idle, and Phantom. Sentry is listed Idle in terms of number of hours Sentry is On, but is not included in the total energy/miles loss at the bottom of the Idle table. The only way to figure out Sentry Mode loss is by looking at the full-day view and adding up the numbers and doing some math.
I would love to know the total miles, total mi/hour, and kW loss due to Sentry Mode.
Customer support service by UserEcho